|
ViP - Ventilatortester
The ViP Ventilatortester is a mobile microprocessor controlled measurement meter for flow, volume, pressure and oxygen.
Developed for medical and laboratory applications and especially used to test ventilators its main advantages are its high measuring precision and simplicity of use.
Its wide spectrum of use lets this meter stand as an ideal unit for surveying and testing tasks.
The measured values can be displayed, saved and printed by a PC programme (communication via RS232).
We have put into action the requests and suggestions of the medical engineers who have been
working with the ViP  Ventilatortester for many years.
The expansion ViPex (tension) comes
to the point. Its special feature are the three flow sensors integrated in a flexible electronic measuring unit.
Advantages:
- no compliance loss, as the measuring unit is directly plugged at the device which has to be tested
- therefore it has a higher measuring precision
- device is less sensitive to disturbances
- troublesome plugging of the single sensors does no longer apply
The following parameters were extended:
- flow measurement even 'lower': with an additional small flow sensor for more exact measurements at minimal flow
- flow measurement even 'higher': expansion of the range to > 200 l/min
- bi-directional inspiratory and expiratory flow measurement with indication of the direction directly at the Y-piece
- Measuring of humidity in the respiration system
Technical Specifications >>>>
Above listed data are valid for calibrated instruments. All data are subject of change without further notice.
All test equipment made by EKU
|
